MAJ MT785

The new MT785 is a True RMS AC and DC watt clamp on meter. This meter provides save, non-invasive measurements of up to 240kW, The light weight, portable, battery powered clamp meter measures the most common ACV, DCV, ACA, DCA and Resistance needed to trouble shoot residential and small commercial electrical systems. The readings are displayed on a 4000 count LCD display and the meter has a back light ideal for use in dimly lit areas. The MT785 is housed in a double injection rubber casing.

• ø30mm Cable
• Measures AC and DC current up to 1000 Amps
• Measures AC/DC Voltage to 600V
• AC/DC Power to 240kW
• Resistance to 40MΩ
• Frequency measurement to 50kHz
• Duty cycle test
• Data hold
• Microprocessor DC zero
• Large LCD display with white LED back light
• Diode test and continuity buzzer
• Auto power off

• Clamp Size : Opening 1.2" (30mm) approx
• Diode Test : Test current of 0.3mA typical; Open circuit voltage 1.5 DC typical.
• Continuity Check : Threshold < 1000Ω; Test current < mA
• Test current of 0.3mA typical; Open circuit voltage 1.5 DC typical.
• Low Battery Indication : "BATT" is displayed
• Overrange Indication : “OL” is displayed
• Display : 4000 counnt LCD
• Measurement Rate : 2 per second, nominal
• Input Impedance : 7.8M (VDC and VAC)
• AC Current : 50/60Hz True RMS(AAC)
• AC Voltage bandwidth : 50/60Hz True RMS (VAC)
• Over Voltage : Category III 600V
• Battery : One "9V" Battery
• Operating Temperature : -10 to 50 °C (14 to 22 F)
• Storage Temperature : -30 to 60°C (-14 140 F)
• Relative Humidity : 90%(0°C to 30°C); 75%(30°C to 40°C); 45%(40°C to 50°C)
• Safety : For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient overvoltages less than Overvoltage Cat. III