Call Us Now !
Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU [RASPBERRY PI 3B+]
Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU [RASPBERRY PI 3B+] Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU [RASPBERRY PI 3B+] Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU [RASPBERRY PI 3B+] Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU [RASPBERRY PI 3B+]

1.4GHZ 1GB RAM Development Board

1.4GHZ / 1GB RAM Development Board
Development Board 1.4GHZ 1GB RAM , SD Card Socket, HDMI, Bluetooth 4.2 , 4 X USB , 1GB Ethernet-requires 5V 2,5A PSU
Part No: RASPBERRY PI 3B+
550.01 ZAR
inc
for 1 Each
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The Raspberry Pi 3B+ has the same dimensions as its predecessor, so that the existing housings and plug-in modules can continue to be used without problems. Much else remains the same and the differences are manageable. Only in the decisive places was hand applied.

Features

Faster network

Thanks to the new LAN7515 chip, Gigabit Ethernet is finally supported. However, you cannot expect the full gigabit data rate. The reason for this is that the chip hangs internally on a USB 2.0 controller, so 315 Mbit/s is the end. In its predecessor, the Raspberry Pi 3B, the speed was only 95 Mbps. Thus one can be completely content with the increase.

Higher CPU clock

The four ARM cores have also been improved. These now clock at 1.4 GHz instead of 1.2 GHz and are therefore around 17% faster. A sheet metal lid serves as a heat spreader to better dissipate the waste heat associated with the increased clock frequency. However, the higher clock speed also results in higher power consumption.

5 GHz WLAN ac

The Broadcom BCM43455 is a new WLAN controller. This now supports dual-band ac WLAN for the 5 GHz frequency band. Instead of two, however, only one antenna is installed, so that the throughput increases only moderately.

Power-over-Ethernet (prepared)

The Raspberry Pi 3B+ now has 4 pins for PoE on the board. A PoE HAT for the Raspberry Pi, which can supply the Raspi with up to 12.95 watts (IEEE 802.af), will be available soon.

Downloads

PDF File
139.17 KB

Copyright © 2019, Communica (Pty) Ltd.

Communica is a wholesale and retail distributor of semiconductors, electromechanical and passive electronic components for automotives, electronics, electrical, automation, mining and process control industries and technical and tertiary educational institutions. We also offer a large range of security and CCTV equipment, power supplies, test instruments and accessories, tools and production equipment, prototyping platforms, and hobby and educational products.