BMT 433MHZ 1CH RX

SKU: BMT 433MHZ 1CH RX

BRAND: Communica


1CH Wireless Relay Remote Control Receiver 433MHz 12V. Can switch 220V 10A

1CH Wireless Relay Remote Control Receiver

Features

Working/output method:

    • Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
    • Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
    • Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Clear & Learn Code:

    • Clear function - After pressing the "KEY" button 8 times, the LED will go off and release all the remote control data in the memory. When the LED flashes for 5 times, it indicates that the clear function is completed.
    • learning function - click the learning button "KEY", LED indicator light indicates that the microprocessor to enter the learning state of the code, press the matching wireless remote control button, LED light blinks 3 times then turn off means Code success.
    • LED flashes to determine the selected function.
      • Flashing 1 time - Jogging function
      • Flashing 2 times - Self-locking function
      • Blink 3 times - Interlock function

Note:

When using for the first time, make sure to clear the factory code and clear the remote control code.

Package included:

    • 1 x 220V 1 Channel Wireless Relay Switch

Specifications

  • Input Voltage: DC10-14V
  • Standby Current: <5MA
  • RF Frequency: 433MHZ
  • RF Working mode:Super heterodyne receiver
  • Receiver Sensitivity: >90dBm
  • Remote Control Distance: >100 meter(In open environment)
  • Decoding Way: MCU Software decoding
  • Can store the number of remote control: 50
  • Support remote control type: Fixed code, learning code
  • Channel: 1CH
  • Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
  • Wiring Method:Fixed wiring terminal
  • Working Voltage: DC12V
  • Output Current: 10A
  • Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC
  • Output:Normally open,Common,Normally closed
  • Dimension:3.5cm x 3cm x 1.6cm

Additional Information

Device Receiver
Type 1CH | Wireless | Relay | Remote | Control