Hikvision Smart Managed 48-Port Gigabit PoE Switch, 2 × Gigabit SFP Uplink Ports, 2 x Gigabit RJ45 Ports, IEEE 802.3af, IEEE 802.3at, PoE Power Budget:470W, PSU:100~240VAC MAX:5A 500W, 104Gbps, Up to 300m Transmission, Surge Protection:6KV
48 Port Gigabit Smart POE Switch
Feature(s)
- IEEE 802.3af/at PoE standard
- 48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports
- Total PoE Power Budget 470W
- PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS
- 104 Gbps Switching Capacity
- 16 K MAC Address Entries
Specifications
General
-
Shell : Metal material
-
Net Weight : 4.35 kg (9.59 lb)
-
Gross Weight : 4.5 kg (9.92 lb)
-
Dimensions (W × H × D) : 440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
-
Operating Temperature : 0 °C to 45 °C (0 °F to 113 °F)
-
Storage Temperature : -40 °C to 85 °C (-40 °F to 185 °F)
-
Operating Humidity : 5% to 95% (no condensation)
-
Relative Humidity : 5% to 95% (no condensation)
-
Power Supply : 100 to 240 VAC, 50/60 Hz, Max. 5 A
-
Installation Mode : Rack (equipped with mounting ears)
-
Max. Power Consumption : 500 W
-
Power Consumption in Idle : 30 W
-
Surge Protection : 6 KV
Network Parameters
-
Ports : 48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
-
MAC Address Table : 16 K
-
Switching Capacity : 104 Gbps
-
Packet Forwarding Rate : 77.38 Mpps
-
Internal Cache : 12 Mbits
PoE Power Supply
-
PoE Standard : IEEE 802.3af,IEEE 802.3at
-
PoE Power Pin : 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
-
PoE Port : PoE: Ports 1 to 48
-
Max. Port Power : 30 W
-
PoE Power Budget : 470 W
Software Function
-
Long Range
- Ports 1 to 48: up to 300 m.
- Long range performance may vary depend on camera model or cable condition.
-
Port Isolation
- Ports 1 to 48: port isolation mode to improve network security.
- Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
-
PoE Watchdog : Ports 1 to 48: auto detect and restart the cameras that do not respond.
-
Link Aggregation
- Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
- Support static link aggregation.
- Support 8 aggregation groups.
-
QoS
- QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
- Support port-based priority configuration.
- Support SP, WRR priority schedule mode.
-
Loop Prevention
- Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
- Support 802.1D STP.
- Suppport 802.1w RSTP.
-
VLAN
- VLAN is used for network scale planning and network health improvement.
- Support 802.1Q.
- Configurable VLAN ID from 1-4094.
- Support Trunk, Access port mode.
- Support Max. 4094 VLAN.
-
HPP
- Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
- Display the port rate.
- Display the port bandwidth utilization rate.
- Display topology information.
- Display the alarm status.
- Restart ports and devices.
- Remotely upgrade the device.
-
System Maintenance : Support remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
-
Port Rate-Limiting : Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
-
Storm Control
- Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
- Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
Downloads
Additional Information
Device |
Switch |
Type |
48 Port | Gigabit | Smart | POE |