ACM ARD PRO MINI 328-3,3V/8MHZ

SKU: ACM ARD PRO MINI 328-3,3V/8MHZ

BRAND: Communica


Arduino Compatible Pro Mini using ATmega328 with 3.3V running 8MHz bootloader

Overview

The minimal design approach to ACM-Arduino, and fully compatible with arduino. This is a 3.3V ACM-Arduino running the 8MHz bootloader (select ‘Arduino pro mini' within the Arduino software). ACM-Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need.

We recommend first time ACM-Arduino users start with the Duemilanove. It’s a great board that will get you up and running quickly. The ACM-Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an ACM-Arduino. The ACM-Arduino Pro Mini is like the ACM-Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The ACM-Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

Note : Cable is Not Included. Crystal 8mhz marked as 0.08 and regulator silk print is 9b27. crystal 16mhz marked as AR, and regulartor silk print is S8MF

Features

  • ATmega328 running at 8Mhz with external resonator (0.5% tolerance)
  • USB connection off board
  • Supports auto-reset
  • 3V3 regulator
  • Max 150mA output
  • Over current protected
  • Reverse polarity protected
  • DC input 5V up to 12V
  • On board Power and Status LEDs
  • Dimensions : 18x33mm
  • Weight : < 2g

     

    Specification

    Downloads

    Subscribe