Coin Acceptor - Programmable • Accepts Coins from 18-30mm in Diameter and 1.2-2.6mm in Thickness.12VDC
Firstly remove the yellow plastic token& replace the coin to the clamp.
If use RMB 1. please switch (SW3) to RMB Only
Choose N.O(Normal Open) or N.C(Normal Close) in coordination with the machine specification. (Normally Mario Machines should be N.C, Gaming Machines be N.O )
Switch to “SW2”:
VR turning for sensitivity of coin acceptance: turn clockwise (+)for strict coin selecting: anti-clockwise(-)for slack.
Lines guide of connector:
- Fast: 25ms/short pulse signal (apply to Mario Machine)
- Medium: 50ms/medium pulse signal (apply to different machine)
- Slow: 100ms/long pulse signal (apply to entertainment machine)
- Notice: If coin-eating , please adjust the switch.
- Red line DC+12V
- White line COIN Signal
- Black line Ground
- Gray line
- Rating voltage: DC+12V with 20percent discrepancy
- Stand by Current: 50mA-55mA
- Operating Current: 310mA-340mA
- Accepted coin diameter: 18mm-32mm
- Accepted coin thickness: 1.2mm-3.0mm
- Size per unit: W 15.3 x D6.5 x H13(mm)
- Net weight: 0.33kgs .Packing: 50 pcs/case
- Per case: 16.6 kgs
- Size per case: W780 x D360 x H278(mm)