HKV DS-K1T671TM-3XF

SKU: HKV DS-K1T671TM-3XF

BRAND: Hikvision


Fever Screening and Face Recognition 7 Inch Stand alone Terminal

Ultra Face Recognition Terminals

Feature(s)

  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
  • Recognition distance: 0.5 to 1.5 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
  • Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronization, and auto synchronization
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  • Imports and export data to the device from the client software
  • Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

Specifications

Temperature Measurement

    • Temperature Range : 30 °C to 45 °C (86 °F to 113 °F)
    • Sensor : Vanadium Oxide uncooled sensor
    • Resolution : 120 × 160
    • Frame Rate : 25 fps
    • Accuracy : ± 0.5 °C, without black body calibration
    • Measuring Distance : 0.5 to 1.5 m

Screen

    • Size : 7-inch
    • Type: Touch screen
    • Operation Method : Touch screen

Camera

    • Pixel : 2 MP
    • Lens: Dual-lens

Network

    • Wired Network: Support, 10/100/1000 Mbps self-adaptive

Interface

    • Network Interface: 1
    • Lock Output : 1
    • Exit Button : 1
    • Door Contact Input : 1

Authentication

    • Card Type : Mifare 1 card

Function

    • Face Anti-Spoofing: Support
    • Audio Prompt : Support

Others

  • Working Temperature : 0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working Humidity : 10 to 90% (No condensing)
  • Application Environment : Indoor and windless environment use only

Downloads

Additional Information

Device Terminal
Type Ultra | Face Recognition