Power Supply Unit with Battery Backup • 12VDC 3A UPS • with Battery Compartment for 7Ah Battery (Battery NOT Included)
12V CCTV Power Supply
Feature
- Input voltage can vary from 90VAC to 265VAC without affecting the output voltage. (output voltage remains constant)
- Input and output fused
- Short circuit protected
- Overload protected (resettable fuse)
- Reverse polarity protected
- Low voltage battery trip (Battery will cut out when voltage falls below 10V)
- Input mains filtration surge, and lightning pmtected.
- All operations are automatic,( in case of a power Inlure the supply will switch to battery,when the supply returns it will automatically retum to normal state)
- Mains Fail Output Facility
- Neat looking PVC flame retardant housing (Custom designed lur the powermax powerpack range)
- The red output wire of power supplies is connected with red pin of battery.
- The black output wire of power supplies is connected with black pin of battery.
Specifications
- Input voltage range : 90VAC to 265VAC
- Input frequency range :47Hz to 63Hz
- Inrush current : 60 Amp max
- Input current : 800ma at full load
- Power supply efficiency : > 75%
- Output no load voltage : < 14VDC
- Battery charger output : 13.8VDC ± 1%
- Output Current : 2200mA
- Battery charger current : 1000mA
- Total power supply current : 3200mA
- Over voltage protection : (The supply shall shut down if output voltage exceeds 16V)
- Operating temperature : 49°C at continious full load
- Insulation resistance (primary to secondary) : 30Meg ohm
- Hi-Pot Test (primary to secondary) : 3600V for 3 seconds
Downloads
Additional Information
Device |
Power Supply |
Type |
CCTV | 12VDC | 3A |
Highlights |
Battery NOT Included |