MD441-11Y-A-T-M20

SKU: MD441-11Y-A-T-M20

BRAND: Schmersal


Limit Switch HD Metal Housing. - Ext. roller lever 2 Pole -1n/o + 1n/c 16A/250VAC max. IP65

Overview

Features

  • 2 Contacts
  • Metal enclosure
  • Protection class IP65
  • 2 cable entries M 20 x 1.5
  • Lever can be transposed by 180°
  • 106 mm x 99 mm x 63 mm (basic component)
  • Continuous adjustment of lever position 360°
  • Actuator head can be repositioned in steps 4 x 90°
  • In temperature-resistant version, the roller can bemounted in two different positions on the shaft

Specification

    • Product name : 441 roller lever D
    • Standards : EN 60947-5-1 : mechanical
    • Slide form : Castor : Grey cast iron, galvanised
    • Enclosure coating material : painted : Silver
    • Roller material : Plastic
    • Gross weight : 1650.000 g

      General data - Features

    • Number of openers : 1
    • Number of shutters : 1

      Mechanical data

    • Actuating element : Roller lever
    • Mechanical life, minimum : 5,000,000 Operations
    • Actuating angle, from left of switch axis : 30 °
    • Actuating angle, from right of switch axis : 30 °
    • Contact opening : 2 x 2.5 mm
    • Actuating speed, minimum : 1 mm/min
    • Actuating speed, maximum : 3 m/s
    • Note (Actuating speed) : Actuating speed with vertical actuating angle to switch axis

      Mechanical data - Connection technique

    • Terminal Connector : Screw connection
    • Cable section, minimum : 1.5 mm²
    • Cable section, maximum : 2.5 mm²
    • Note (Cable section) : All indications about the cable section are including the conductor ferrules.
    • Wire cross-section : 13 AWG

Mechanical data - Dimensions

    • Height of sensor : 237 mm
    • Length of sensor : 63 mm
    • Width of sensor : 106 mm
    • Width of Castor : 9 mm
    • Diameter of Castor : 36 mm

Ambient conditions

    • Protection class : IP 65 to IEC/EN 60529
    • Ambient temperature, minimum : -30 °C
    • Ambient temperature, maximum : +90 °C

Ambient conditions - Insulation value

    • Rated impulse withstand voltage : 4 kV

Electrical data

  • Thermal test current : 16 A
  • Utilisation category AC-15 : 250 VAC
  • Utilisation category AC-15 : 4 A
  • Switching element : NO contact, NC contact
  • Note (Switching element) : galvanically separated contact bridges
  • Switching principle : Snap switch element
  • Bounce duration, maximum : 5 ms
  • Switchover time, maximum : 35 ms

Downloads