Relay module with forced-guided contacts according to EN 50205 for safety circuits. The control is via DC 110 V. There are 2 openers and 4 contact contacts 250 V / 6 A are available for switching small to medium loads
Specifications
Rated voltage UN : DC 110 V
Voltage rangeDC 77 V - 137.5 V
Rated current (for UN)12 mA
Status indicator LEDLED yellow
Protective circuit input side
Freewheeling diode
Reverse polarity diode
Switching voltageAC/DC 5 V - 250 V
Switching currentAC/DC 0.005 A - 6 A
Switching power1500 VA / (50 W x DC 24 V)
Contact materialAgCuNi + 0.2 microns Au
General data
Connection type
Push
Single-wire 0.20 - 2.5 mm2
AWG 20 - AWG 14
Hostile 0.20 - 2.5 mm2
AWG 20 - AWG 14
Stripping length: 8 mm
Screwdriver: 3.5 x 0.6 mm
Installation position/type of installationAny : Any
Short-circuit resistance : 1000 A, SCPD 6 A Functional class gG (pre-fuse)
Rated insulation voltage
AC/DC 300 V between control and load side
AC/DC 300 V between coil and control contacts
Degree : PD2
Surge category : OV2
Contact type : 2 opener, 4 normally open (forced-guided, according to EN 50205 application type A)
Mech. Life : approx. 10 x 106 switching cycles
Housing material : PC ABS
Working temperature range : -40 °C ... +70 °C (+85 °C 10 min)