SONOFF ZBM5-1C-120W ZIGBE SWITCH

SKU: SONOFF ZBM5-1C-120W ZIGBE SWITCH

BRAND: Sonoff


A ZIGBEE 1 Gang Smart Wall Light Which Can Easily Be Connected Whether A Neutral Wire Is Available Or Not. Please Note That The Supported SONOFF ZIGBEE HUB is needed. ZIGBEE End Device (No Neutral Wiring Used) OR ZIGBEE Router (Neutral Wiring Used)

1 Gang Smart Wall Switch

Overview

This device is a Zigbee-based smart wall switch, which allows for either neutral required mode or no neutral required mode wiring, depending on your home’s circuit setup. Used with a SONOFF Zigbee gateway, you can achieve remote control of device opening/closing, setting schedule/timer, creating smart scenes, and other smart control methods.

Specifications

  • Model : ZBM5-1C-120W
  • MCU : EFR32MG22
  • Rating : 1C: 100-240V~ 50/60Hz 10A Max Resistive load  μ
  • LED load : 1C: 400W@240V, 200W@100V
  • Min. load : 3W (No neutral required input mode)
  • Wireless connectivity : Zigbee 3.0
  • Net Weight : 1C: 176g, 2C: 184g, 3C:193g
  • Dimension : 120x74x39.4mm
  • Color : White
  • Casing Material : PC+CRS
  • Applicable Place : Indoor
  • Working Temperature : -10℃~40℃
  • Working Humidity : 5%~95% RH, non-condensing
  • Certification : Certification CE/FCC/RoHS
  • Rated impulse voltage : 4KV
  • Automatic action : 20000 Cycles
  • Control type : 1.B
  • Operating altitude : Operating altitude 2000m
  • Executive standard : EN IEC 60669-2-1

Downloads

Additional Information

Device Switch
Type 1 Gang | Smart | Wall
Upgrade your home with the SONOFF ZBM5-1C-120W Zigbee Switch, a versatile smart wall light that works with or without a neutral wire. Enjoy seamless remote control, scheduling, and smart scenes when paired with a SONOFF Zigbee Hub. Experience convenience and energy efficiency while enhancing your smart home setup today!

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike
Works great and easy to setup

I purchased well over a dozen of these in total as a mix of 1-3 gang switches. They were very easy to add to my home assistant with my ZBT-1 and it all works well.

*** Please do take note that if you do not have a neutral wire then these are not doubling up as routers. ****

I additionally purchased a couple extra dongle-e devices (which can be flashed online with sonoff as a router) too so as to extend and build the mesh for wireless control. I advise others to take this into account. Pulling neutral wires in my home (due to the design) would be too costly and hence why I chose the zigbee M5 setup over a matter setup.

You can easily expose these switches to Apple Home with the correct integrations in Home Assistant too. I use a few key devices in my control centre widgets thanks to that.