The Anycubic PLA Silk Filament in Copper is designed for makers who want their prints to look as impressive as the ideas behind them. This 1 kg spool delivers a rich, silk-like sheen in a warm copper tone, making it ideal for decorative artwork, display pieces, and fan creations where surface finish matters. Compatible with standard FDM printers using a 0.4 mm nozzle or larger, it prints reliably at 210–240 °C with a heated bed set to 55–56 °C and supports print speeds of 50–250 mm/s. The filament is also tested for flexibility and resilience, reducing the risk of breakage during feeding — including in multi-material setups like the Anycubic ACE Pro, where the built-in intelligent identification chip allows the printer to read filament information automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing. A straightforward, high-quality material for anyone who wants functional prints with a genuinely elegant finish.

• Smooth, silky-lustre surface finish — ideal for decorative parts, artwork, and display models
• Warm Copper colour (hex #AF5C37) with vibrant, radiant colour contrast
• Multicolour gradient printing supported — colour transition adjustable by print quantity
• Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition
• Resilient and flexible — tested to resist breakage during feeding and multi-colour operation
• Prints at 210–240 °C nozzle temperature; heated bed at 55–56 °C
• Recommended print speed: 50–250 mm/s
• Reusable filament spool with threaded locking system to reduce entanglement

• Colour: Copper (#AF5C37)
• Package Weight: 1 kg
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 ℃
• Heated Bed Temperature: 55-56 ℃
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index: 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 164 ℃
• Vicat Softening Temperature: 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young’s Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported

What’s in the Box

• Anycubic PLA Silk Filament 1kg – Copper x1