Victron Isolated DC-DC Converter 24V 12A 280W , I/P Votage Range: 16→35VDC, O/P Voltage Adjust Range:20→30VDC , 16mm² AWG6, IP43, {130x186x70mm}, 1.3Kg
Isolated DC-DC Converter
Feature
- Remote on-off : The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).
- All models are short circuit proof and can be paralleled to increase output current : An unlimited number of units can be connected in parallel.
- High temperature protected : The output current will reduce at high ambient temperature.
- IP43 protection : When installed with the screw terminals oriented downwards.
- Screw terminals : No special tools needed for installation.
- Input fuse (not replaceable) : On 12 V and 24 V input models only.
- Adjustable output voltage
- Not intended for battery charging.
- Please consider using an Orion-Tr Smart for battery charging.
Specifications
- Input voltage range : 16-35 V
- Under voltage shutdown : 14 V
- Under voltage restart : 15 V
- Nominal output voltage : 24.2 V
- Output voltage adjust range : 20-30 V
- Output voltage tolerance : +/- 0,2 V
- Output noise : 2 mV rms
- Cont. output current at nominal output voltage and 40 °C : 12 A
- Maximum output current (10 s) at nominal output voltage : 15 A
- Short circuit output current : 30 A
- Cont. output power at 25 °C : 320 W
- Cont. output power at 40 °C : 280 W
- Efficiency : 89 %
- Off load current : < 80 mA
- Galvanic isolation : 200 VDC between input, output and case
- Operating temperature range : -20 to +55 °C (derate 3 % per °C above 40 °C)
- Humidity : Max. 95 % non-condensing
- DC connection : Screw terminals
- Maximum cable cross-section : 16 mm2 AWG6
- Weight : 1,3 kg (3 lb)
- Dimensions hxwxd : 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Downloads
Additional Information
| Device |
Converter |
| Type |
Isolated | DC-DC |
